(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Insert（Length L (after insertion) (D = Thread Dia. M)：2D）
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products.
[Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18
You can purchase from 1 piece!
Application: Strengthens the female thread of the base.
Features: Durable screw connection. You can create a concise design.
Material: SUS304.- Volume Discount
Standard Price: MYR 4.23- Days to Ship: 1 Day(s) or more -
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
Standard Price: MYR 13.20- Days to Ship: 4 Day(s) or more -
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-7,000 Pieces Per Package】
TOKAI METAL INDUSTRY
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.- Volume Discount
Standard Price: MYR 0.71- Days to Ship: 2 Day(s) or more -
Recoil-Free (mm) SUS304【1-3 Pieces Per Package】
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Standard Price: MYR 6.29- Days to Ship: 4 Day(s) or more -
MISUMI
There is no need to break the tongue after insertion, making the insertion process easy
[Specification expansion] In response to many requests, a new standard product has been released! *Please see the specification list or catalog PDF for applicable products.- Volume Discount
Standard Price: MYR 6.80- Days to Ship: 2 Day(s) or more -
Sprue【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Standard Price: MYR 2.30- Days to Ship: 5 Day(s) or more -
Brass Bit Insert (Standard, Double-sided) HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.44- Days to Ship: 11 Day(s) or more -
Tangless Insert Unified Coarse
ACCURATE
Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.
Standard Price: MYR 3.20- Days to Ship: 7 Day(s) or more -
Tangless Insert Metric Coarse【1-50 Pieces Per Package】
ACCURATE
An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.
Standard Price: MYR 2.12- Days to Ship: 4 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: MYR 4.04- Days to Ship: 5 Day(s) or more -
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.30- Days to Ship: 11 Day(s) or more -
RECOIL
[Features]
·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
·Dedicated tools enable the insertion and extraction without tangs.
·Extraction will not damage the male threads nor the product.
·You don't have to tear off the tang, look for the broken tang, or check the gauge.Standard Price: MYR 3.84- Days to Ship: 4 Day(s) or more -
Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Standard Price: MYR 2.63- Days to Ship: 5 Day(s) or more -
RECOIL
The color of the main body will become silver when the method of heat treatment changes.
Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.Standard Price: MYR 100.56- Days to Ship: 4 Day(s) or more -
Stainless Steel/Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 3.48- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type) IRB/IRB-C
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 2.34- Days to Ship: 11 Day(s) or more -
Recoil-Free (Specified mm) SUS304
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Standard Price: MYR 7.98- Days to Ship: 7 Day(s) or more -
Stainless Steel E-Sert (Unify) (UNC)【1-100 Pieces Per Package】
SUNCO
[Nominal]
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 5.66- Days to Ship: 5 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 4.76- Days to Ship: 11 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: MYR 189.21- Days to Ship: 2 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.
Standard Price: MYR 7.30 Days to Ship: 5 Day(s) or more -
Recoil Packet (Milli)【5-10 Pieces Per Package】
RECOIL
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10Standard Price: MYR 28.34- Days to Ship: 4 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: MYR 282.12- Days to Ship: 4 Day(s) or more -
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.06- Days to Ship: 5 Day(s) or more -
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.29- Days to Ship: 2 Day(s) or more -
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Standard Price: MYR 6.66- Days to Ship: 4 Day(s) or more -
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Standard Price: MYR 5.90- Days to Ship: 4 Day(s) or more -
RECOIL
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
Standard Price: MYR 6.45- Days to Ship: 4 Day(s) or more -
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
Standard Price: MYR 5.42- Days to Ship: 4 Day(s) or more -
JAPAN DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8Standard Price: MYR 1.40- Days to Ship: 1 Day(s) or more -
Heat-Lok (HL Type)【1-500 Pieces Per Package】
JAPAN DRIVEIT
· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7Standard Price: MYR 1.90- Days to Ship: 2 Day(s) or more -
JAPAN DRIVEIT
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0Standard Price: MYR 4.94- Days to Ship: 5 Day(s) or more -
Tangless insert metric coarselocking
ACCURATE
A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.
Standard Price: MYR 3.20- Days to Ship: 2 Day(s) or more -
Tangless insert unified coarse locking
ACCURATE
A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.
Standard Price: MYR 3.46- Days to Ship: 8 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 4.67- Days to Ship: 11 Day(s) or more -
ACCURATE
Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.
Standard Price: MYR 3.29- Days to Ship: 6 Day(s) or more -
Sprue (Fine, P=1.25)【1-50 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Standard Price: MYR 7.13- Days to Ship: 5 Day(s) or more -
Sprue (Unified) (UNC)【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
Standard Price: MYR 5.84- Days to Ship: 5 Day(s) or more -
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI METAL INDUSTRY
These inserts are the best choice for easy and secure fitment into plastic holes.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Standard Price: MYR 2.24- Days to Ship: 5 Day(s) or more -
RECOIL
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
Standard Price: MYR 5.39- Days to Ship: 4 Day(s) or more -
Tangless insert unified fine locking
ACCURATE
A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.
Standard Price: MYR 3.62- Days to Ship: 8 Day(s) or more -
Stainless Steel Tangless Insert
SUNCO
[Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 4.94- Days to Ship: 5 Day(s) or more -
Stainless Steel Sprue (Other, Fine)【100 Pieces Per Package】
SUNCO
[Nominal M] 8, 24, 33
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 372.40 Days to Ship: 5 Day(s) or more -
Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 45.56- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | RECOIL | TOKAI METAL INDUSTRY | RECOIL | MISUMI | NIPPON SPREW | HIROSUGI-KEIKI | ACCURATE | ACCURATE | TSUGAMI | HIROSUGI-KEIKI | RECOIL | TOKAI METAL INDUSTRY | RECOIL | HIROSUGI-KEIKI | HIROSUGI-KEIKI | RECOIL | SUNCO | HIROSUGI-KEIKI | MISUMI | TSUGAMI | RECOIL | MISUMI | TOKAI METAL INDUSTRY | TOKAI METAL INDUSTRY | RECOIL | RECOIL | RECOIL | RECOIL | JAPAN DRIVEIT | JAPAN DRIVEIT | JAPAN DRIVEIT | ACCURATE | ACCURATE | HIROSUGI-KEIKI | ACCURATE | NIPPON SPREW | NIPPON SPREW | TOKAI METAL INDUSTRY | TOKAI METAL INDUSTRY | RECOIL | ACCURATE | SUNCO | SUNCO | SUNCO |
| Product Series | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-7,000 Pieces Per Package】 | Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】 | Stainless Steel E-Sert (Unify) (UNC)【1-100 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】 | Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 16 | 3 ～ 12 | 1.7 ～ 6 | 2 ～ 42 | 2.5 ～ 10 | 2 ～ 30 | 1.4 ～ 5 | - | 2 ～ 20 | 2 ～ 24 | 1.4 ～ 5 | 2.5 ～ 12 | 2.6 ～ 8 | 3 ～ 12 | 2 ～ 6 | 2 ～ 6 | 8 ～ 24 | - | 2.6 ～ 6 | 3 ～ 8 | 10 | 3 ～ 16 | 2.5 ～ 8 | 1.4 ～ 6 | 2 ～ 5 | - | - | 3 ～ 24 | 3 ～ 16 | 2 ～ 6 | 3 ～ 6 | 3 ～ 8 | 2.5 ～ 12 | - | 2.6 ～ 6 | - | 10 ～ 18 | - | 2 ～ 6 | 3 ～ 8 | 3 ～ 24 | - | 2 ～ 20 | 8 | 2.2 ～ 36 |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Standard | Standard | Standard | Standard | Tangless | Standard | Press Fit | Tangless | Tangless | Standard | Press Fit | Tangless | Standard | Standard | Self-Tapping | Self-Tapping | Standard | Standard | Self-Tapping | Standard | Standard | Standard | Tangless | Standard | Standard | Standard | Standard | Standard | Standard | Press Fit | Press Fit | Self-Tapping | Tangless | Tangless | Self-Tapping | Tangless | Standard | Standard | Standard | Standard | Standard | Tangless | Tangless | Standard | Standard |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel (SUS303/304) | Nitrox 60 | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) / Phosphor Bronze | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Brass | Inconel X-750 | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS316) | Brass | Brass | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Phosphor Bronze | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) |
| Screw Type | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Unified (Fine) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D | 2D |
| Application | Light Metal | Light Metal | Resin General | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Resin General | Light Metal / Cast Iron | Cast Iron | Light Metal | Light Metal | - | Cast Iron | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Resin General | Resin General | Light Metal | Light Metal | Light Metal | Light Metal | - | Resin General | Resin General | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Resin General | Resin General | Light Metal | Light Metal / Cast Iron / Resin General | - | - | - |
| Notch | Provided | Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | - | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | - | - | Not Provided | - | Provided | Provided | Not Provided | Not Provided | Provided | - | Provided | Provided | Provided |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | 1/4 ～ 10 | - | - | - | - | - | - | - | - | - | 1/2-13 ～ #10-24 | - | - | - | - | - | - | - | 1/2-13 ～ #10-24 | 1/2-20 ～ #10-32 | - | - | - | - | - | - | 1/4 ～ 10 | - | 1/4 ～ 10 | - | 1/2-13 ～ #10-24 | - | - | - | 1/4 ～ 10 | - | - | - |
| Shape | - | - | Standard | - | - | - | Standard | - | - | - | Standard | - | Standard | - | Standard | Standard | - | Slotted | Slotted | - | - | - | - | Standard | Standard | - | - | - | - | Standard | Standard | Standard | - | - | Slotted | - | - | - | Standard | Standard | - | - | Standard | Standard | Standard |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | - | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | - | - | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
- Wood
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
-
- HIROSUGI-KEIKI (19)
- SUNCO (13)
- RECOIL (12)
- JAPAN DRIVEIT (11)
- ACCURATE (9)
- TOKAI METAL INDUSTRY (7)
- NIPPON SPREW (5)
- KS SANGYO (2)
- TSUGAMI (2)
- KKV (0)
- HIROSUGI SEIKI (0)
- IMAO CORPORATION (0)
- SEL JAPAN (0)
- BOHSEI (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Insert
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy