(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Drill Bits（Coating Y/N：Available）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
NACHI(FUJIKOSHI)
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.Standard Price: MYR 47.25- Days to Ship: 5 Day(s) or more -
EX-GOLD Drills Stub for Stainless & Mild Steels_EX-SUS-GDS
OSG
[Features]A drill with an overall length of 38 mm to 170 mm.
[Applications]Can be used for stainless steel, mild steel, copper alloys, etc.Standard Price: MYR 40.63- Days to Ship: 2 Day(s) or more -
NACHI(FUJIKOSHI)
Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.Standard Price: MYR 35.47- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Standard Price: MYR 314.43- Days to Ship: 5 Day(s) or more -
OSG
Thanks to its high-rigidity groove form and stub groove length, it provides high efficiency and high precision and is ideal for pilot hole tapping and lathe processing.
Standard Price: MYR 52.27- Days to Ship: 4 Day(s) or more -
EX-GOLD Drills Regular for Stainless & Mild Steels_EX-SUS-GDR
OSG
Regular groove length series ideal for stainless steel, mild steel, aluminum alloy, copper alloy, etc.
Standard Price: MYR 44.93- Days to Ship: 5 Day(s) or more -
MUGEN-COATING Miniature Drill MDR-R
NS TOOL
High precision specification ideal for precision parts machining. Diameter tolerance 0 to -0.005 mm
Standard Price: MYR 109.61- Days to Ship: 5 Day(s) or more -
Toglon Hard Drill Bit Short ALD Coating
IWATA TOOL
[Features]
· Outstanding performance compared to conventional high hardness types.
· 3-flute design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
· Hole position accuracy improved by use with Toglon® Hard SPStandard Price: MYR 311.00- Days to Ship: 9 Day(s) or more -
Aqua Drill EX Oil Hole Pilot AQDEXOHPLT
NACHI(FUJIKOSHI)
[Features]
· Drill for drilling guide holes.
· High bite performance guide hole improves centering during deep hole drilling, giving improved drilling performance.Standard Price: MYR 471.75- Days to Ship: 5 Day(s) or more -
High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】
MISUMI
[Features]
·Lineup of frequently used sizes in packs
·Straight shank type with general-purpose high-speed steel TiN-coated- Volume Discount
Standard Price: MYR 78.20- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
· Allows high-speed, high-efficiency machining up to mold steel and aluminum.
* Cannot be used for austenitic stainless steel.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.Standard Price: MYR 61.14- Days to Ship: 5 Day(s) or more -
OSG
The groove length is between the stubby and regular sizes and achieves non-step high speed machining up to 4 times the diameter, even for small diameters
Standard Price: MYR 56.42- Days to Ship: 2 Day(s) or more -
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
MISUMI
[Features]
·Ideal for high-precision small-diameter hole drilling
·The shank diameter is unified to 3 mm, enabling high-precision chucking
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining- Volume Discount
Standard Price: MYR 149.57- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.Standard Price: MYR 33.36- Days to Ship: 5 Day(s) or more -
EX-GOLD Drills Medium for Stainless & Mild Steels_EX-SUS-GDN
OSG
[Features]A drill with an overall length of 41 mm to 50 mm.
[Applications]Can be used for stainless steel, mild steel, copper alloys, etc.Standard Price: MYR 62.17- Days to Ship: 5 Day(s) or more -
OSG
[Features]With an overall length of 59 mm to 235 mm, it is a highly versatile drill capable of non-step, high-speed machining up to 4 to 5 times the diameter.
Standard Price: MYR 64.30- Days to Ship: 2 Day(s) or more -
VP-GOLD Drills Stub for Hardened Steel_VPH-GDS
OSG
Exerts excellent cost performance for tempered steel processing of 40 to 50 HRC
Standard Price: MYR 66.99- Days to Ship: 5 Day(s) or more -
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit
UNION TOOL
[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: CarbideStandard Price: MYR 93.72- Days to Ship: 8 Day(s) or more -
WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL
OSG
Ideal for processing from 55 to 70 HRC. A drill for ultra-high-hardness steel in which stable processing by highly reliable cutting edge shape and coating for high-hardness steel are combined.
Standard Price: MYR 340.11- Days to Ship: 5 Day(s) or more -
Micro Drill, for Stainless Steel
ATOM
Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.
Standard Price: MYR 166.56- Days to Ship: 5 Day(s) or more -
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Standard Price: MYR 155.67- Days to Ship: 5 Day(s) or more -
Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Standard Price: MYR 422.31- Days to Ship: 5 Day(s) or more -
KYOCERA
It is an insert for MagicDrill DRA type that has high centripetal force with a special 2-step tip angle and achieves excellent cylindricity, roundness and surface roughness in steel machining.
Standard Price: MYR 296.33- Days to Ship: 5 Day(s) or more -
SEC-Multi Drill, SMDT-MEL Type
SUMITOMO ELECTRIC HARDMETAL
Interchangeable head drill with radial serration coupling for high precision and strength. Adopts special surface processing that has outstanding wear and rust resistance.
Standard Price: MYR 430.96- Days to Ship: 5 Day(s) or more -
Aqua Drill EX Flat Regular AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
· Flat drill for 4D boring depth with excellent drilling performance.
· A centering hole or guide hole is required.
[Applications]
· Countersinking on inclined surfaces and correction of eccentric bores.
· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.Standard Price: MYR 363.46- Days to Ship: 5 Day(s) or more -
AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Standard Price: MYR 572.03- Days to Ship: 5 Day(s) or more -
Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 3D SDOX3A
OKAZAKI SEIKO
[Features]
· Ideal for machining stainless steel and other difficult-to-cut materials.
· Realizes smooth cutting powder ejection.
[Specifications]
· Coolant through (with OH)Standard Price: MYR 274.21- Days to Ship: 14 Day(s) -
Crystal Solid Drill ZH300, TiN Coating
RYOCO SEIKI
[Features]
· TiN coating is a highly reliable and versatile coating.
· The surface hardness is HV2,000 to 2,200, the heat-resistance temperature is around 500°C and the friction coefficient is 0.4
· The outer diameter and the shank diameter are the same.Standard Price: MYR 127.06 Days to Ship: 9 Day(s) or more -
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-SUS-3D
OSG
[Features]
· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work.
3D type with oil holeStandard Price: MYR 343.40- Days to Ship: 9 Day(s) or more -
MISUMI
[Features]
·Drilling and counterbore processing can be performed in 1 process for bolt hole processing, realizing highly efficient processing (Counterbore type)
·Since relief hole can be drilled at same time as drilling power strip pilot hole, it is ideal for drilling pilot hole in thick plates that require relief (Incision type)- Volume Discount
Standard Price: MYR 346.19- Days to Ship: 4 Day(s) or more -
G Short Tapered Shank Drill GTS
NACHI(FUJIKOSHI)
Taper type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.Standard Price: MYR 322.49- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.Standard Price: MYR 369.20- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.Standard Price: MYR 191.22- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills (Diamond Coated)_D-GDN
OSG
Demonstrates power in machining not only aluminum alloys, but also high silicone aluminum alloys where carbide drills have extremely short lives
Standard Price: MYR 554.92- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Standard Price: MYR 104.21- Days to Ship: 5 Day(s) or more -
WXS Coated Carbide Drill for Hardened Steel (5D Type)_WH55-5D
OSG
Stable processing of die cast molds is possible. Ideal for steel materials up to 55 HRC
Standard Price: MYR 292.43- Days to Ship: 5 Day(s) or more -
DIJET
[Features]
Tips for exchanging cuttings type drills with easy tip replacement and excellent cutting performance.Standard Price: MYR 415.66- Days to Ship: 5 Day(s) or more -
Carbide Flat Drill 2D Type_ADF-2D
OSG
[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.Standard Price: MYR 236.13- Days to Ship: 4 Day(s) or more -
Carbide Flat Drill - Long Shank 2D Type_ADFLS-2D
OSG
[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.Standard Price: MYR 328.64- Days to Ship: 9 Day(s) or more -
Aqua Drill EX Oil Hole 20D AQDEXOH20D
NACHI(FUJIKOSHI)
[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 20 times the drill diameter.Standard Price: MYR 1,093.38- Days to Ship: 9 Day(s) or more -
OSG
[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chipsStandard Price: MYR 219.42- Days to Ship: 4 Day(s) or more -
Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D
OSG
[Features]
· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesStandard Price: MYR 732.17- Days to Ship: 9 Day(s) or more -
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D
OSG
[Features]
· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work.
5D type with oil holeStandard Price: MYR 478.62- Days to Ship: 9 Day(s) or more -
TiAlN Coated Carbide Drill, Stub
MISUMI
[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 110.18- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide Drill, Regular
MISUMI
[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.- Volume Discount
Standard Price: MYR 106.68- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | NS TOOL | IWATA TOOL | NACHI(FUJIKOSHI) | MISUMI | NACHI(FUJIKOSHI) | OSG | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | UNION TOOL | OSG | ATOM | ATOM | NACHI(FUJIKOSHI) | KYOCERA | SUMITOMO ELECTRIC HARDMETAL | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OKAZAKI SEIKO | RYOCO SEIKI | OSG | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | DIJET | OSG | OSG | NACHI(FUJIKOSHI) | OSG | OSG | OSG | MISUMI | MISUMI |
| Product Series | EX-GOLD Drills Regular for Stainless & Mild Steels_EX-SUS-GDR | High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】 | TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model | EX-GOLD Drills Medium for Stainless & Mild Steels_EX-SUS-GDN | WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL | Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 3D SDOX3A | Carbide Drill with Internal Coolant Supply (3D Type)_ADO-SUS-3D | Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS | WXS Coated Carbide Drill for Hardened Steel (5D Type)_WH55-5D | Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D | Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D | ||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 14 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 0.5 ～ 20 | 0.5 ～ 32 | 1 ～ 20 | 0.5 ～ 20 | 1.15 ～ 12.4 | 2 ～ 32 | .0.4 ～ 1 | 1 ～ 12 | 1.015 ～ 12.03 | 0.5 ～ 13 | 2 ～ 32 | 0.5 ～ 6 | 0.38 ～ 2.7 | 1 ～ 20 | 1 ～ 1.99 | 2 ～ 32 | 0.5 ～ 20 | 0.1 ～ 3 | 2 ～ 12 | 0.1 ～ 3 | 0.03 ～ 3 | 3 ～ 20 | 7.94 ～ 25.5 | 19.5 ～ 22 | 3 ～ 20 | 3 ～ 16 | 3.85 ～ 11.85 | 2 | 2.8 ～ 20 | 3.4 ～ 10.3 | 7 ～ 32 | 2.1 ～ 16 | 2 ～ 12 | 1 ～ 12 | 0.1 ～ 5 | 2 ～ 12 | 14 ～ 32 | 2 ～ 20 | 3 ～ 20 | 1 ～ 10 | 2 ～ 12 | 3 ～ 12 | 2 ～ 20 | 0.3 ～ 6 | 0.3 ～ 13 |
| Overall Length L(mm) | 38 ～ 168 | 38 ～ 170 | 33 ～ 168 | 47 ～ 145 | 39 ～ 108 | 56 ～ 245 | 38 | 50 ～ 110 | 54 ～ 122 | 22 ～ 151 | 56 ～ 255 | 38 ～ 87 | 38 | 40 ～ 168 | 41 ～ 50 | 56 ～ 245 | 38 ～ 132 | 38 | 42 ～ 120 | 38 ～ 45 | 38 ～ 50 | 100 ～ 250 | - | - | 60 ～ 195 | 68 ～ 146 | - | 40 | 66 ～ 165 | 73 ～ 136 | 126 ～ 235 | 45 ～ 112 | 47 ～ 130 | 41 ～ 126 | 38 ～ 64 | 68 ～ 156 | - | 50 ～ 140 | 100 ～ 250 | 71 ～ 280 | 62 ～ 102 | 90 ～ 215 | 70 ～ 205 | 38 ～ 66 | 38 ～ 124 |
| Groove Length L(mm) | 3 ～ 94 | 3 ～ 90 | 8 ～ 94 | 1.65 ～ 90 | 7 ～ 51 | 24 ～ 165 | 1.2 ～ 10 | 6 ～ 51 | 3.3 ～ 54 | 6 ～ 101 | 24 ～ 185 | 6 ～ 43 | 6 ～ 12 | 6 ～ 94 | 9 ～ 18 | 24 ～ 165 | 3 ～ 66 | 1.2 ～ 12 | 12 ～ 76 | 1 ～ 15 | 0.3 ～ 25 | 14 ～ 90 | - | - | 19 ～ 126 | 2 ～ 72 | - | 20 | 17 ～ 100 | 21 ～ 72 | 45 ～ 114 | 10 ～ 55 | 15 ～ 73 | 9 ～ 76 | 0.6 ～ 26 | 18 ～ 96 | - | 10 ～ 88 | 15 ～ 88 | 23 ～ 230 | 14 ～ 55 | 40 ～ 155 | 18 ～ 140 | 2 ～ 28 | 3 ～ 77 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | high hardness steel[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Titanium[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | high hardness steel[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] | general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] | - | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Quenched and tempered steel[◎] / high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] |
| Shank Type | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | - | - | - | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | - | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | - | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank |
| Tool Material Type | High-speed steel | High Vanadium HSS | Cobalt HSS | Carbide | Cobalt HSS | High Vanadium HSS | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Cobalt HSS | Carbide | High-speed steel | High Vanadium HSS | Cobalt HSS | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | - | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| With/without Oil Hole | NA | NA | NA | NA | NA | NA | - | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available / NA | - | Available | - | Available | Available | NA | Available | NA | - | - | NA | NA | NA | NA | - | NA | NA | Available | NA | Available | Available | NA | NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiCN | TiN | TiN | Other | TiN | TiN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiN | TiCN | TiN | TiAlN | TiAlN | TiN | TiN | Other | Other | Other | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Other | - | For High Hardness (Silicon Group) | Other | Other | TiAlN | TiN | Other | TiAlN | TiN | Other | DLC | Dia Coat | Other | Other | Other | Other | Other | For General Steels (AlCrN, etc.) | Other | Other | Other | TiAlN | TiAlN |
Loading...
Configure
Specification/Dimensions
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.128
- 0.13
- 0.135
- 0.14
- 0.143
- 0.145
- 0.147
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.432
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.632
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1
-
1～1.995
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.5X10D
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.6×10D
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.7X10D
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.8×10D
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.9X10D
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2×10D
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.1×10D
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.2×10D
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.3×10D
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.383
- 2.39
- 2.4
- 2.4×10D
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.5×10D
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.6×10D
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.7×10D
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.779
- 2.78
- 2.79
- 2.8
- 2.8×10D
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.9×10D
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3×10D
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.1×10D
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.2×10D
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.3×10D
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.4×10D
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.5×10D
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.58
- 3.59
- 3.6
- 3.6×10D
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.7×10D
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.8×10D
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.9×10D
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4×10D
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.1×10D
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.176
- 4.18
- 4.19
- 4.2
- 4.2×10D
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.3×10D
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.4×10D
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.5×10D
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.6×10D
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.7×10D
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.8×10D
- 4.81
- 4.82
- 4.83
- 4.837
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.9×10D
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5×10D
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.1×10D
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.2×10D
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.3×10D
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.4×10D
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.49999999999999
- 5.5
- 5.5×10D
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.558
- 5.56
- 5.565
- 5.57
- 5.58
- 5.59
- 5.59999999999999
- 5.6
- 5.6×10D
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.69999999999999
- 5.7
- 5.7×10D
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.79999999999999
- 5.8
- 5.8×10D
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.89999999999999
- 5.9
- 5.9×10D
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6×10D
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.09999999999999
- 6.1
- 6.1×10D
- 6.13
- 6.15
- 6.19999999999999
- 6.2
- 6.2×10D
- 6.23
- 6.25
- 6.29999999999999
- 6.3
- 6.3×10D
- 6.33
- 6.35
- 6.35 (¼")
- 6.365
- 6.375
- 6.39999999999999
- 6.4
- 6.4×10D
- 6.43
- 6.45
- 6.49999999999999
- 6.5
- 6.5×10D
- 6.528
- 6.53
- 6.55
- 6.59999999999999
- 6.6
- 6.6×10D
- 6.63
- 6.65
- 6.69999999999999
- 6.7
- 6.7×10D
- 6.73
- 6.746
- 6.75
- 6.8
- 6.8×10D
- 6.83
- 6.85
- 6.89999999999999
- 6.9
- 6.9×10D
- 6.93
- 6.95
- 6.97
- 6.98
- 6.99
-
7～7.99
- 7
- 7×10D
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.09999999999999
- 7.1
- 7.1×10D
- 7.13
- 7.14
- 7.145
- 7.15
- 7.19999999999999
- 7.2
- 7.2×10D
- 7.23
- 7.25
- 7.29999999999999
- 7.3
- 7.3×10D
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39999999999999
- 7.4
- 7.4×10D
- 7.43
- 7.45
- 7.49999999999999
- 7.5
- 7.5×10D
- 7.52
- 7.53
- 7.54
- 7.541
- 7.55
- 7.59999999999999
- 7.6
- 7.6×10D
- 7.63
- 7.65
- 7.67
- 7.69999999999999
- 7.7
- 7.7×10D
- 7.73
- 7.75
- 7.79999999999999
- 7.8
- 7.8×10D
- 7.83
- 7.85
- 7.89999999999999
- 7.9
- 7.9×10D
- 7.93
- 7.938
- 7.94
- 7.94 to 8.49
- 7.95
- 7.953
- 7.97
- 7.98
- 7.99
-
8～8.99
- 8
- 8×10D
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.09999999999999
- 8.1
- 8.1×10D
- 8.13
- 8.15
- 8.19999999999999
- 8.2
- 8.2×10D
- 8.23
- 8.25
- 8.29999999999998
- 8.3
- 8.3×10D
- 8.33
- 8.334
- 8.35
- 8.39999999999998
- 8.4
- 8.4×10D
- 8.43
- 8.433
- 8.45
- 8.5
- 8.50 to 8.99
- 8.5×10D
- 8.50000000000001
- 8.53
- 8.55
- 8.58
- 8.59999999999998
- 8.6
- 8.6×10D
- 8.61
- 8.63
- 8.65
- 8.69999999999998
- 8.7
- 8.7×10D
- 8.73
- 8.733
- 8.75
- 8.79999999999998
- 8.8
- 8.8×10D
- 8.80000000000001
- 8.83
- 8.84
- 8.85
- 8.89999999999998
- 8.9
- 8.9×10D
- 8.90000000000001
- 8.93
- 8.95
- 8.96
- 8.98
- 8.99
-
9～9.99
- 9
- 9.00 to 9.49
- 9×10D
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.09999999999998
- 9.1
- 9.1×10D
- 9.129
- 9.13
- 9.15
- 9.19999999999998
- 9.2
- 9.2×10D
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.29999999999998
- 9.3
- 9.3×10D
- 9.30000000000001
- 9.33
- 9.34
- 9.347
- 9.35
- 9.36
- 9.38
- 9.39999999999998
- 9.4
- 9.4×10D
- 9.40000000000001
- 9.43
- 9.45
- 9.49999999999998
- 9.5
- 9.50 to 9.99
- 9.5×10D
- 9.50 to 11.07
- 9.50000000000001
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.59999999999998
- 9.6
- 9.6×10D
- 9.60000000000001
- 9.63
- 9.65
- 9.69999999999998
- 9.7
- 9.7×10D
- 9.70000000000001
- 9.73
- 9.75
- 9.79999999999998
- 9.8
- 9.8×10D
- 9.80000000000001
- 9.83
- 9.85
- 9.89999999999998
- 9.9
- 9.9×10D
- 9.90000000000001
- 9.92
- 9.921
- 9.93
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10×10D
- 10.00 to 10.49
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.1×10D
- 10.13
- 10.15
- 10.2
- 10.2×10D
- 10.23
- 10.25
- 10.3
- 10.3×10D
- 10.32
- 10.33
- 10.35
- 10.4
- 10.4×10D
- 10.43
- 10.45
- 10.5
- 10.5×10D
- 10.50 to 10.99
- 10.53
- 10.55
- 10.6
- 10.6×10D
- 10.63
- 10.65
- 10.7
- 10.7×10D
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.8×10D
- 10.83
- 10.85
- 10.9
- 10.9×10D
- 10.93
- 10.95
- 10.96
- 10.98
- 10.99
-
11～11.99
- 11
- 11×10D
- 11.00 to 11.49
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.1×10D
- 11.10 to 12.95
- 11.11
- 11.113
- 11.13
- 11.133
- 11.15
- 11.2
- 11.2×10D
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.3×10D
- 11.33
- 11.34
- 11.35
- 11.36
- 11.38
- 11.4
- 11.4×10D
- 11.43
- 11.45
- 11.5
- 11.5×10D
- 11.50 to 11.99
- 11.509
- 11.51
- 11.53
- 11.55
- 11.56
- 11.6
- 11.6×10D
- 11.63
- 11.65
- 11.7
- 11.7×10D
- 11.73
- 11.75
- 11.8
- 11.8×10D
- 11.83
- 11.85
- 11.9
- 11.9×10D
- 11.908
- 11.91
- 11.93
- 11.95
- 11.96
- 11.98
- 11.99
-
12～12.99
- 12
- 12×10D
- 12.00 to 12.49
- 12.0 or more, less than 12.5
- 12.00 to 12.99
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.2
- 12.25
- 12.3
- 12.304
- 12.4
- 12.5
- 12.50 to 12.99
- 12.5 or more, less than 13.0
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.95
- 12.96
- 12.98
- 12.98 to 17.65
- 12.99
-
13～13.99
- 13
- 13.00 to 13.49
- 13.0 or more, less than 13.5
- 13.00 to 13.99
- 13.01
- 13.02
- 13.03
- 13.096
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.5
- 13.50 to 13.99
- 13.5 or more and 14.5 or less
- 13.55
- 13.6
- 13.7
- 13.75
- 13.8
- 13.89
- 13.891
- 13.9
- 13.95
- 13.98
- 13.99
-
14～14.99
- 14
- 14.00 to 14.49
- 14.0～14.5
- 14.00 to 14.99
- 14~16
- 14.01
- 14.02
- 14.03
- 14.1
- 14.2
- 14.25
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.50 to 14.99
- 14.6
- 14.6～15.5
- 14.68
- 14.684
- 14.7
- 14.75
- 14.8
- 14.9
- 14.95
- 14.96
- 14.98
- 14.99
-
15～15.99
- 15
- 15.00 to 15.99
- 15.01
- 15.02
- 15.03
- 15.08
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.48
- 15.5
- 15.50 to 17.65
- 15.55
- 15.6
- 15.6～16.5
- 15.7
- 15.75
- 15.8
- 15.87
- 15.875
- 15.9
- 15.95
- 15.98
- 15.99
-
16～16.99
- 16
- 16.00 to 16.99
- 16.01
- 16.02
- 16.03
- 16.1
- 16.2
- 16.25
- 16.27
- 16.271
- 16.3
- 16.4
- 16.5
- 16.5~19.5
- 16.6
- 16.6～17.5
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
- 16.98
- 16.99
-
17～17.99
- 17
- 17.00 to 17.99
- 17.01
- 17.02
- 17.03
- 17.07
- 17.1
- 17.2
- 17.25
- 17.3
- 17.4
- 17.46
- 17.463
- 17.5
- 17.53 to 24.38
- 17.55
- 17.6
- 17.6～18.5
- 17.7
- 17.75
- 17.8
- 17.86
- 17.9
- 17.98
- 17.99
-
18～18.99
- 18
- 18.00 to 18.99
- 18.00 to 19.99
- 18.01
- 18.02
- 18.03
- 18.1
- 18.2
- 18.25
- 18.258
- 18.26
- 18.3
- 18.4
- 18.5
- 18.6
- 18.6～19.5
- 18.65
- 18.654
- 18.7
- 18.75
- 18.8
- 18.9
- 18.98
- 18.99
-
19～19.99
- 19
- 19.00 to 19.99
- 19.01
- 19.02
- 19.03
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.45
- 19.5
- 19.55
- 19.6
- 19.6～20.5
- 19.7
- 19.75
- 19.8
- 19.84
- 19.9
- 19.95
- 19.98
- 19.99
-
20～20.9
- 20
- 20.00 to 20.99
- 20.00 to 21.99
- 20~23.9
- 20.01
- 20.02
- 20.03
- 20.1
- 20.2
- 20.24
- 20.25
- 20.3
- 20.4
- 20.5
- 20.6
- 20.6～21.5
- 20.64
- 20.7
- 20.75
- 20.8
- 20.9
-
21～21.9
- 21
- 21.00 to 21.99
- 21.03
- 21.1
- 21.2
- 21.25
- 21.3
- 21.4
- 21.43
- 21.5
- 21.6
- 21.6～22.5
- 21.7
- 21.75
- 21.8
- 21.83
- 21.83 to 24.38
- 21.9
-
22～22.9
- 22
- 22.00 to 22.99
- 22.00 to 23.99
- 22.1
- 22.2
- 22.22
- 22.23
- 22.25
- 22.3
- 22.4
- 22.5
- 22.6
- 22.6～23.5
- 22.62
- 22.7
- 22.75
- 22.8
- 22.9
-
23～23.9
- 23
- 23.00 to 23.99
- 23.02
- 23.1
- 23.2
- 23.25
- 23.3
- 23.4
- 23.42
- 23.5
- 23.6
- 23.6～24.5
- 23.7
- 23.75
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.00 to 24.99
- 24.00 to 25.99
- 24.1
- 24.2
- 24.21
- 24.25
- 24.3
- 24.4
- 24.41 to 35.05
- 24.5
- 24.5/24.7
- 24.5～24.7
- 24.6
- 24.6～25.5
- 24.61
- 24.7
- 24.75
- 24.8
- 24.9
-
25～25.9
- 25
- 25.00 to 25.50
- 25.1
- 25.2
- 25.25
- 25.3
- 25.4
- 25.5
- 25.6
- 25.6～26.5
- 25.7
- 25.75
- 25.8
- 25.9
-
26～26.99
- 26
- 26.00 to 28.99
- 26.1
- 26.19
- 26.2
- 26.25
- 26.3
- 26.4
- 26.5
- 26.5/26.7
- 26.5～26.7
- 26.59
- 26.6
- 26.6～27.5
- 26.7
- 26.75
- 26.8
- 26.9
- 26.99
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.6～28.5
- 27.7
- 27.75
- 27.78
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.25
- 28.3
- 28.4
- 28.5
- 28.57
- 28.6
- 28.6～29.5
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.00 to 31.99
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.6～30.5
- 29.7
- 29.8
- 29.9
-
30～30.8
- 30
- 30.00 to 35.05
- 30.1
- 30.2
- 30.3
- 30.5
- 30.6～31.5
- 30.7
- 30.8
-
31～31.8
- 31
- 31.2
- 31.3
- 31.5
- 31.6～32.0
- 31.7
- 31.75
- 31.8
-
32
-
32～32.8
- 32.00 to 35.00
- 32.2
- 32.3
- 32.5
- 32.7
- 32.8
-
33～33.5
- 33
- 33.5
-
34～34.5
- 34
- 34.36 to 47.80
- 34.5
-
35
-
35.5
-
36～36.91
- 36
- 36~43
- 36.5
- 36.91
-
37～37.7
- 37
- 37.5
- 37.7
-
38
-
38～38.5
- 38.1
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41
-
41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.8
- 44
- 44~52
- 44.5
- 44.8
-
45～45.5
- 45
- 45.5
-
46～46.99 to 65.28
- 46
- 46.5
- 46.99 to 65.28
-
47～47.63
- 47
- 47.5
- 47.63
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52～52.5
- 52
- 52.5
-
53～53.5
- 53
- 53~63
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.2
- 55.5
-
56～56.5
- 56
- 56.5
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.5
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.38 to 89.08
- 62.5
-
63～63.5
- 63
- 63.5
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.5
-
68～68.5
- 68
- 68.5
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.5
- 71
- 71.5
-
72～72.5
- 72
- 72.5
-
73～73.5
- 73
- 73.5
-
74～74.5
- 74
- 74.5
-
75
-
76
-
77
-
78
-
79～79.50
- 79
- 79.50
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87～87.76 to 114.48
- 87
- 87.76 to 114.48
-
88
-
89
-
90
-
91
-
92
-
93
-
94～94.50
- 94
- 94.50
-
95～95.50
- 95
- 95.50
-
96
-
97
-
98
-
99
-
100
-
103
-
105
-
110
-
115
-
120
-
143.0
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.99
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.36
- 0.4
- 0.42
- 0.44
- 0.48
- 0.5
- 0.54
- 0.55
- 0.6
- 0.66
- 0.7
- 0.77
- 0.8
- 0.88
- 0.9
- 0.99
-
1～1.98
- 1
- 1,000
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.05
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.05
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.25
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.5
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.5
- 29
- 29.3
- 29.4
- 29.5
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.8
- 31
- 31.2
- 31.5
- 31.7
- 31.8
-
32～32.8
- 32
- 32.3
- 32.4
- 32.8
-
33～33.8
- 33
- 33.5
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.4
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.2
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46～46.5
- 46
- 46.5
-
47
-
48
-
49～49.5
- 49
- 49.5
-
50
-
51
-
52～52.5
- 52
- 52.5
-
53
-
54
-
55～55.5
- 55
- 55.5
-
56
-
57
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.5
-
63～63.4
- 63
- 63.4
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.1
- 67.5
-
68
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.7
- 71
- 71.7
-
72
-
73～73.5
- 73
- 73.5
-
74
-
75～75.5
- 75
- 75.5
-
76～76.8
- 76
- 76.5
- 76.8
-
77
-
78
-
79～79.5
- 79
- 79.5
-
80～80.5
- 80
- 80.1
- 80.5
-
81～81.5
- 81
- 81.4
- 81.5
-
82～82.6
- 82
- 82.5
- 82.6
-
83
-
84
-
85～85.5
- 85
- 85.4
- 85.5
-
86～86.5
- 86
- 86.2
- 86.5
-
87
-
88～88.5
- 88
- 88.5
-
89
-
90～90.5
- 90
- 90.1
- 90.5
-
91
-
92～92.5
- 92
- 92.5
-
93
-
94～94.7
- 94
- 94.7
-
95～95.5
- 95
- 95.5
-
96
-
97～97.5
- 97
- 97.5
-
98～98.8
- 98
- 98.8
-
99
-
100～100.5
- 100
- 100.5
-
101
-
102
-
103～103.5
- 103
- 103.4
- 103.5
-
104
-
105～105.5
- 105
- 105.5
-
106
-
107
-
108～108.5
- 108
- 108.4
- 108.5
-
109
-
110～110.5
- 110
- 110.5
-
111
-
112
-
113
-
114～114.5
- 114
- 114.5
-
115～115.5
- 115
- 115.5
-
116
-
117
-
118
-
119～119.5
- 119
- 119.5
-
120～120.5
- 120
- 120.5
-
121
-
122
-
123
-
124～124.5
- 124
- 124.5
-
125～125.5
- 125
- 125.1
- 125.5
-
126
-
127
-
128
-
129～129.6
- 129
- 129.6
-
130
-
131
-
132
-
133～133.5
- 133
- 133.5
-
134
-
135～135.2
- 135
- 135.2
-
136
-
137
-
138
-
140
-
141.5
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150～150.5
- 150
- 150.5
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158～158.5
- 158
- 158.5
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167～167.5
- 167
- 167.5
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175～175.5
- 175
- 175.5
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184～184.5
- 184
- 184.5
-
185
-
186
-
188
-
189
-
190
-
191
-
192～192.1
- 192
- 192.1
-
193
-
194
-
195
-
196
-
197
-
198
-
200～200.6
- 200
- 200.6
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208～208.2
- 208
- 208.2
-
209
-
210
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
230
-
231
-
232
-
234
-
235
-
236
-
238
-
239
-
240
-
242
-
244
-
245
-
246
-
247
-
248
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
270
-
272
-
274
-
275
-
276
-
277
-
278
-
280
-
282
-
285
-
287
-
290
-
292
-
295
-
298
-
300
-
302
-
305
-
310
-
315
-
318
-
320
-
321
-
322
-
323
-
325
-
327
-
330
-
335
-
337
-
340
-
343
-
350
-
355
-
360
-
370
-
372
-
385
-
400
-
402
-
432
-
440
-
450
-
460
-
500
-
512
-
550
-
600
-
692
-
700
-
800
-
860
-
1030
-
-
work material
-
Shank Type
-
Tool Material Type
-
With/without Oil Hole
-
Coating Y/N
- Available
- NA
-
Coating Type
Narrow search by specifying Manufacturer
-
- GUHRING (86)
- NACHI(FUJIKOSHI) (64)
- OSG (55)
- NGK SPARK PLUG (25)
- SUMITOMO ELECTRIC HARDMETAL (18)
- MAPAL (16)
- DIJET (12)
- IWATA TOOL (10)
- NS TOOL (8)
- ATOM (6)
- OKAZAKI SEIKO (5)
- ISCAR (4)
- UNION TOOL (4)
- EIKOSHA (3)
- FUKUDA (2)
- RYOCO SEIKI (2)
- SANDVIK (2)
- ISHIHASHI (1)
- KYOWA SEIKO (1)
- KYOCERA (1)
- NIKKENKOSAKU (1)
- SAITOTWISTDRILL (1)
- WIDIA (1)
- OMIKOGYO (0)
- HOZAN (0)
- TRUSCO (0)
- MARVEL (0)
- NAKANISHI (0)
- DIXI (0)
- ESCO (0)
- WIDIN (0)
- BICTOOL (0)
- 7 LEADERS (0)
- ASAHI TOOLS (0)
- BOTEK (0)
- TOYO DRILL (0)
- THE CUT (0)
CAD
-
- 2D
- 3D
Related Categories to Drill Bits
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy