(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Open Timing Belt HTD 3M/5M/8M
Part Number
Configured Part Number is shown.
Product Overview
Open belts are components that transmit the rotational power generated by the motor.
They achieve transmission and delivery through the engagement between the timing pulley and the timing belt teeth.
Open belts are suitable for reciprocating motion and are equipped with a variety of connecting metal parts.
They achieve transmission and delivery through the engagement between the timing pulley and the timing belt teeth.
Open belts are suitable for reciprocating motion and are equipped with a variety of connecting metal parts.
Dimensional Drawing
Specification Overview
■Material table
Polyurethane belts may change color over time, but the strength and other factors will not be affected.
Operating temperature -20℃～60℃.
Total length (number of teeth x pitch).
This product is not suitable for gapless timing pulleys.
The weight is a theoretical value and may differ from the actual weight
 Material | |
| ①Main Body | ②Core wire |
| Polyurethane (white) | Steel wire |
| Belt Type | Pitch | H | h | i | Unit weight |
| g/m(Width 10mm) | |||||
| H3M | 3 | 2.2 | 1.13 | 1.07 | 27 |
| H5M | 5 | 3.7 | 2.2 | 1.5 | 38 |
| H8M | 8 | 5.8 | 3.4 | 2.4 | 61 |
Polyurethane belts may change color over time, but the strength and other factors will not be affected.Operating temperature -20℃～60℃.Total length (number of teeth x pitch).This product is not suitable for gapless timing pulleys.The weight is a theoretical value and may differ from the actual weightSpecification Table
■Specifications
The total length is (number of teeth × tooth pitch).
kgf＝N×0.101972
| Type | Belt type | Nominal belt width | Number of teeth Upper limit~lower limit | Belt width (mm) | Allowable tension (N) |
| E-LHTBO (Standard type) E-LTBOHA (Tooth-Side Fabric Coated Type) E-LTBONA (Back-Side Fabric Coated Type) E-LTBORA (Double-sided Fabric Coated Type) | H3M | 060 | 100～10000 | 6 | 136 |
| 090 | 9 | 226 | |||
| 120 | 12 | 247 | |||
| 150 | 15 | 309 | |||
| H5M | 090 | 60～10000 | 9 | 750 | |
| 150 | 15 | 1175 | |||
| 250 | 25 | 2100 | |||
| H8M | 200 | 40～10000 | 20 | 1986 | |
| 250 | 25 | 3250 | |||
| 300 | 30 | 4000 | |||
| 400 | 40 | 5275 |
The total length is (number of teeth × tooth pitch).kgf＝N×0.101972Product Features
Feature 1: The product has embedded steel wire core wire, which is more cost-effective and has a wider range of applications.
Feature 2: There is no exposed steel wire core wire on the side of the opening to avoid scratching the opponent or injuring the operator.
Feature 3: It can be used in conjunction with the toothed plate for timing belt connection, linear guide rails, single-axis drives and other products, and is suitable for equipment with a high degree of automation.
Feature 2: There is no exposed steel wire core wire on the side of the opening to avoid scratching the opponent or injuring the operator.
Feature 3: It can be used in conjunction with the toothed plate for timing belt connection, linear guide rails, single-axis drives and other products, and is suitable for equipment with a high degree of automation.
Precautions
■Storage Precautions
①Avoid sunlight.
②Do not use in an environment with direct contact with water, solvents, oil, acid, alkali, ultraviolet rays, ozone, etc.
Especially do not allow oil to adhere to the belt, otherwise it will cause the belt to swell and significantly shorten the service life of the belt.
③Using temperature -20℃～60℃.
④Do not pile up in large quantities or bend forcibly.
⑤Do not place directly on the ground.
⑥Do not allow the belt to come into contact with chemicals.
①Avoid sunlight.
②Do not use in an environment with direct contact with water, solvents, oil, acid, alkali, ultraviolet rays, ozone, etc.
Especially do not allow oil to adhere to the belt, otherwise it will cause the belt to swell and significantly shorten the service life of the belt.
③Using temperature -20℃～60℃.
④Do not pile up in large quantities or bend forcibly.
⑤Do not place directly on the ground.
⑥Do not allow the belt to come into contact with chemicals.
Example of Use
Equipment Name:
Belt driven lateral transport device
Function Description:
Application of open belt in reciprocating motion mechanism.
For more information, click
here.
Belt driven lateral transport device
Function Description:
Application of open belt in reciprocating motion mechanism.
For more information, click
here.Application industry
| Food | Semiconductor | Smartphone | ||
 |  |  | ||
| Medical | Electronic appliances | Lithium batteries | ||
 |  |  |
Related products
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-LHTBO-H3M060-[100-10000/1] |
| E-LHTBO-H3M090-[100-10000/1] |
| E-LHTBO-H3M120-[100-10000/1] |
| E-LHTBO-H3M150-[100-10000/1] |
| E-LHTBO-H5M090-[60-10000/1] |
| E-LHTBO-H5M150-[60-10000/1] |
| E-LHTBO-H5M250-[60-10000/1] |
| E-LHTBO-H8M200-[40-10000/1] |
| E-LHTBO-H8M250-[40-10000/1] |
| E-LHTBO-H8M300-[40-10000/1] |
| E-LHTBO-H8M400-[40-10000/1] |
| E-LTBOHA-H3M060-[100-10000/1] |
| E-LTBOHA-H3M090-[100-10000/1] |
| E-LTBOHA-H3M120-[100-10000/1] |
| E-LTBOHA-H3M150-[100-10000/1] |
| E-LTBOHA-H5M090-[60-10000/1] |
| E-LTBOHA-H5M150-[60-10000/1] |
| E-LTBOHA-H5M250-[60-10000/1] |
| E-LTBOHA-H8M200-[40-10000/1] |
| E-LTBOHA-H8M250-[40-10000/1] |
| E-LTBOHA-H8M300-[40-10000/1] |
| E-LTBOHA-H8M400-[40-10000/1] |
| E-LTBONA-H3M060-[100-10000/1] |
| E-LTBONA-H3M090-[100-10000/1] |
| E-LTBONA-H3M120-[100-10000/1] |
| E-LTBONA-H3M150-[100-10000/1] |
| E-LTBONA-H5M090-[60-10000/1] |
| E-LTBONA-H5M150-[60-10000/1] |
| E-LTBONA-H5M250-[60-10000/1] |
| E-LTBONA-H8M200-[40-10000/1] |
| E-LTBONA-H8M250-[40-10000/1] |
| E-LTBONA-H8M300-[40-10000/1] |
| E-LTBONA-H8M400-[40-10000/1] |
| E-LTBORA-H3M060-[100-10000/1] |
| E-LTBORA-H3M090-[100-10000/1] |
| E-LTBORA-H3M120-[100-10000/1] |
| E-LTBORA-H3M150-[100-10000/1] |
| E-LTBORA-H5M090-[60-10000/1] |
| E-LTBORA-H5M150-[60-10000/1] |
| E-LTBORA-H5M250-[60-10000/1] |
| E-LTBORA-H8M200-[40-10000/1] |
| E-LTBORA-H8M250-[40-10000/1] |
| E-LTBORA-H8M300-[40-10000/1] |
| E-LTBORA-H8M400-[40-10000/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Belt Type | Belt Width (mm) (mm) | Type | Number of Teeth |
|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 13 Day(s) | 3M | 6 | Standard Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 9 | Standard Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 12 | Standard Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 15 | Standard Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 9 | Standard Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 15 | Standard Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 25 | Standard Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 20 | Standard Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 25 | Standard Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 30 | Standard Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 40 | Standard Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 6 | Tooth Surface Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 9 | Tooth Surface Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 12 | Tooth Surface Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 15 | Tooth Surface Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 9 | Tooth Surface Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 15 | Tooth Surface Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 25 | Tooth Surface Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 20 | Tooth Surface Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 25 | Tooth Surface Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 30 | Tooth Surface Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 40 | Tooth Surface Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 6 | Back Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 9 | Back Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 12 | Back Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 15 | Back Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 9 | Back Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 15 | Back Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 25 | Back Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 20 | Back Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 25 | Back Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 30 | Back Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 40 | Back Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 6 | Double-Sided Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 9 | Double-Sided Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 12 | Double-Sided Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 3M | 15 | Double-Sided Patch Type | 100 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 9 | Double-Sided Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 15 | Double-Sided Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 5M | 25 | Double-Sided Patch Type | 60 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 20 | Double-Sided Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 25 | Double-Sided Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 30 | Double-Sided Patch Type | 40 ～ 10000 | ||
- | 1 Piece(s) | 13 Day(s) | 8M | 40 | Double-Sided Patch Type | 40 ～ 10000 |
Loading...
Basic Information
| Belt Shape | Open End | Belt Material | Polyurethane Belt | Belt Tooth Surface | Standard (Single Sided) |
|---|---|---|---|---|---|
| Core Wire Material | Steel Cord | Belt Shape Type | Circular Tooth Profile HTD Belt | Transmission Torque | High Torque Transmission |
Specification/Dimensions
-
Belt Type
- 3M
- 5M
- 8M
-
Belt Width (mm)(mm)
-
Type
- Back Patch Type
- Double-Sided Patch Type
- Standard Type
- Tooth Surface Patch Type
-
Number of Teeth
-
type
- E-LHTBO
- E-LTBOHA
- E-LTBONA
- E-LTBORA
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: After using the polyurethane timing belt for a period of time, it changes color. Will it affect its use?
- Answer: No, polyurethane belts may change color over time, but the strength will not be affected.
- Question: What kind of belt material is better for working conditions with high cleanliness requirements?
- Answer: Polyurethane belts are recommended, which have significantly improved dust drop compared to rubber belts.
- Question: Can the open belt be used for transmission after matching with the connecting tooth plate?
- Answer: It can be used for transmission and can only be used for linear reciprocating motion.
- Question: What are the two main types of polyurethane timing belts according to the interface form?
-
Answer:
Open type, the length of the open belt can be freely specified.
Closed type, the length of the connecting belt is processed with joints at both ends, and this type of connecting belt is only suitable for transmission function.
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy